-40%

HDD PCB Seagate 100835923REV A (ST500LM030 ST1000LM035 ST1000LM048 ST2000LM007)

$ 18.48

Availability: 100 in stock
  • Brand: Seagate
  • Condition: 100% workable condition! Collected on from HDD that spin-up correctly and detected in the BIOS but has bad sectors or other problems with HDA (Head and Disk Assembly). The item may have some signs of cosmetic wear, but is fully operational as intended.
  • MPN: 100835923
  • Model: 100835923 REV A
  • Main Controller IC: 500021781
  • Controller P/N (PCB Sticker): 100840519 C / 0519 C
  • All returns accepted: ReturnsNotAccepted
  • Compatible HDD models: ST500LM030 ST1000LM035 ST1000LM048 ST2000LM007
  • HDD Motor Combo IC: SMOOTH 100785184
  • Form Factor: 2.5 in
  • HDD P/N: 1RK17D / 1RK172 / 2E172 / 1K8174

    Description

    Hard Disk Drive Circuit Board / Logic Board 100835923 for 500GB-2.0TB 5400rpm 128MB SATA III 2.5" Seagate BarraCuda / Mobile HDD STxx00LM0xx
    PCB Model
    100835923 REV A
    PCB P/N (PCB sticker)
    100840519 C / 0519 C
    Compatible HDD models
    ST500LM030
    ST1000LM035
    ST1000LM048
    ST2000LM007
    HDD P/N
    1RK17D 1RK17D-xxx 1RK17D-500
    2E717D 2E717D-xxx 2E717D-500
    1RK172 1RK172-xxx 1RK172-500
    2E7172 2E7172-xxx 2E7172-500
    1R8174 1R8174-xxx 1R8174-568
    Main Controller IC
    500021781
    HDD Motor Combo IC
    SMOOTH 100812925
    Functionality:
    This item has been fully tested, verified working and guaranteed to be OK before shipment.
    Before making this purchase, please make sure that you
    really
    understand that this PCB is the proper board for your hard drive.  The
    buyer
    is fully responsible for verifying compatibility issues for this item.
    I can only provide basic compatibility information for the drive,
    please
    contact
    before You Buy for assistance.
    I do not guarantee
    compatibility with your software and/or hardware.
    Included with listing
    :
    This is
    just an electronic board
    , PCB (Printed Circuit Board / Logic board), only
    what is pictured above
    .
    Accessories, power cords, cables, adapter, hard drive, etc. are
    not included
    unless pictured.
    This PCB is intended
    for data recovery or HDD repair
    , in other words - it is intended for you to diagnose if your hard drive has a circuit board problem, and if it does, recover your data.
    Please note that this item can fix drives with a circuit board problem
    ONLY
    .
    Some drives have additional internal damages that can't be detected easily.
    The ROM IC on the PCB board is programmed with the unique parameters/settings of it's original hard drive.
    You need to swap the ROM IC (indicated by a
    red circle
    on the photo
    )
    , then the donor board will be compatible with your hard drive.
    Warranty and returns:
    This unit is sold
    "AS IS"
    for parts or repair, and without any warranty. All sales of PCB boards are final due to installation issues.
    I`m do not accept returns on any of Printed circuits boards due to possibility of installation errors or other issues that may have made the original board fail.
    I`m accept only 30 days non-defective returns for items that were ordered by mistake with no traces of soldering and other effects.
    Buyer pays return shipping.